Question # 1
An engineer must create an EEM applet that sends a syslog message in the event a change happens in the network due to trouble with an OSPF process. Which action should the engineer use?
| | A. action 1 syslog msg "OSPF ROUTING ERROR" | | B. action 1 syslog send "OSPF ROUTING ERROR" | | C. action 1 syslog pattern "OSPF ROUTING ERROR" | | D. action 1syslog write "OSPF ROUTING ERROR" |
C. action 1 syslog pattern "OSPF ROUTING ERROR"
Question # 2
Refer to the exhibit.
| | A. Option A | | B. Option B | | C. Option C | | D. Option D |
Explanation: With BGP, we must advertise the correct network and subnet mask in the “network” command (in this case network 10.1.1.0/24 on R1 and network 10.2.2.0/24 on R2). BGP is very strict in the routing advertisements. In other words, BGP only advertises the network which exists exactly in the routing table. In this case, if you put the command “network x.x.0.0 mask 255.255.0.0” or “network x.0.0.0 mask 255.0.0.0” or “network x.x.x.x mask 255.255.255.255” then BGP will
not advertise anything.
It is easy to establish eBGP neighborship via the direct link. But let’s see what are required when we want to establish eBGP neighborship via their loopback interfaces. We will need two commands:
+ the command “neighbor 10.1.1.1 ebgp-multihop 2” on R1 and “neighbor 10.2.2.2 ebgpmultihop 2” on R1. This command increases the TTL value to 2 so that BGP updates can reach the BGP neighbor which is two hops away.
+ Answer ‘R1 (config) #router bgp 1
R1 (config-router) #neighbor 192.168.10.2 remote-as 2
R1 (config-router) #network 10.1.1.0 mask 255.255.255.0
R2 (config) #router bgp 2
R2 (config-router) #neighbor 192.168.10.1 remote-as 1
R2 (config-router) #network 10.2.2.0 mask 255.255.255.0
Quick Wireless Summary
Cisco Access Points (APs) can operate in one of two modes: autonomous or lightweight
+ Autonomous: self-sufficient and standalone. Used for small wireless networks.
+ Lightweight: A Cisco lightweight AP (LAP) has to join a Wireless LAN Controller (WLC) to function.
LAP and WLC communicate with each other via a logical pair of CAPWAP tunnels.
– Control and Provisioning for Wireless Access Point (CAPWAP) is an IETF standard for control messaging for setup, authentication and operations between APs and WLCs. CAPWAP is similar to LWAPP except the following differences:
+CAPWAP uses Datagram Transport Layer Security (DTLS) for authentication and encryption to protect traffic between APs and controllers. LWAPP uses AES.
+ CAPWAP has a dynamic maximum transmission unit (MTU) discovery mechanism.
+ CAPWAP runs on UDP ports 5246 (control messages) and 5247 (data messages) An LAP operates in one of six different modes:
+ Local mode (default mode): measures noise floor and interference, and scans for intrusion detection (IDS) events every 180 seconds on unused channels
+ FlexConnect, formerly known as Hybrid Remote Edge AP (H-REAP), mode: allows data traffic to be switched locally and not go back to the controller. The FlexConnect AP can perform standalone client authentication and switch VLAN traffic locally even when it’s disconnected to the WLC (Local Switched). FlexConnect AP can also tunnel (via CAPWAP) both user wireless data and control traffic to a centralized WLC (Central Switched).
+ Monitor mode: does not handle data traffic between clients and the infrastructure. It acts like a sensor for location-based services (LBS), rogue AP detection, and IDS
+ Rogue detector mode: monitor for rogue APs. It does not handle data at all.
+ Sniffer mode: run as a sniffer and captures and forwards all the packets on a particular channel to a remote machine where you can use protocol analysis tool (Wireshark, Airopeek, etc) to review the packets and diagnose issues. Strictly used for troubleshooting purposes.
+ Bridge mode: bridge together the WLAN and the wired infrastructure together.
Mobility Express is the ability to use an access point (AP) as a controller instead of a real WLAN controller. But this solution is only suitable for small to midsize, or multi-site branch locations where you might not want to invest in a dedicated WLC. A Mobility Express WLC can support up to 100 Aps.
Question # 3
When is an external antenna used inside a building? | | A. only when using Mobility Express | | B. when it provides the required coverage | | C. only when using 2 4 GHz | | D. only when using 5 GHz |
B. when it provides the required coverage
Question # 4
| | A. Option A | | B. Option B | | C. Option C | | D. Option D | | E. Option E |
Question # 5
An engineer must protect the password for the VTY lines against over-the-shoulder attacks. Which configuration should be applied? | | A. service password-encryption | | B. username netadmin secret 9 $9$vFpMf8elb4RVV8$seZ/bDA | | C. username netadmin secret 7$1$42J36k33008Pyh4QzwXyZ4 | | D. line vty 0 15 p3ssword XD822j |
A. service password-encryption
Explanation:
cisco(config)#username test privilege 15 password test777
cisco(config)#do s running-config | include user
username test privilege 15 password 0 test777
cisco(config)#service password-encryption
cisco(config)#do s running-config | include user
username test privilege 15 password 7 044F0E151B761B19
cisco(config)#
cisco(config)#do wr
Building configuration...
[OK]
cisco(config)#
Question # 6
An engineer creates the configuration below. Drag and drop the authentication methods from the left into the order of priority on the right. Not all options are used.
|
Question # 7
Why would an architect use an OSPF virtual link?
| | A. to allow a stub area to transit another stub area | | B. to connect two networks that have overlapping private IP address space | | C. to merge two existing Area Os through a nonbackbone | | D. to connect a nonbackbone area to Area 0 through another nonbackbone area |
D. to connect a nonbackbone area to Area 0 through another nonbackbone area
Explanation: A virtual link is a logical connection between two OSPF routers that belong to different areas but share a common border with a transit area. A virtual link allows an OSPF router to participate in the backbone area (Area 0) even if it is not physically connected to it. This way, the OSPF network can maintain connectivity and routing consistency across all areas. A virtual link is configured between the OSPF router IDs of the two routers that need to be connected to the backbone area123.
Option A is incorrect because a stub area is an area that does not receive external routes from other autonomous systems or other OSPF areas. A stub area can only transit traffic to and from the backbone area, and it cannot be used as a transit area for a virtual link12.
Option B is incorrect because a virtual link does not change the IP address space of the networks that it connects. A virtual link is transparent to the IP layer and only affects the OSPF routing protocol. To connect two networks that have overlapping private IP address space, other solutions such as NAT or VPN are required12.
Option C is incorrect because a virtual link cannot merge two existing Area 0s through a nonbackbone area. A virtual link can only extend an existing Area 0 through a nonbackbone area. If there are two separate Area 0s in an OSPF network, they cannot be merged by a virtual link, and the network is considered to be partitioned. A partitioned network can cause routing loops and inconsistencies, and it should be avoided12. References: 1: Configure OSPF Connection in a Virtual Link Environment, 2: How to configure OSPF Virtual Link, 3: Understand OSPF Areas and Virtual Links
Cisco 350-401 Exam Dumps
5 out of 5
Pass Your Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam in First Attempt With 350-401 Exam Dumps. Real CCNP Enterprise Exam Questions As in Actual Exam!
— 983 Questions With Valid Answers
— Updation Date : 20-Nov-2024
— Free 350-401 Updates for 90 Days
— 98% Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Passing Rate
PDF Only Price 99.99$
19.99$
Buy PDF
Speciality
Additional Information
Testimonials
Related Exams
- Number 1 Cisco CCNP Enterprise study material online
- Regular 350-401 dumps updates for free.
- Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Practice exam questions with their answers and explaination.
- Our commitment to your success continues through your exam with 24/7 support.
- Free 350-401 exam dumps updates for 90 days
- 97% more cost effective than traditional training
- Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Practice test to boost your knowledge
- 100% correct CCNP Enterprise questions answers compiled by senior IT professionals
Cisco 350-401 Braindumps
Realbraindumps.com is providing CCNP Enterprise 350-401 braindumps which are accurate and of high-quality verified by the team of experts. The Cisco 350-401 dumps are comprised of Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) questions answers available in printable PDF files and online practice test formats. Our best recommended and an economical package is CCNP Enterprise PDF file + test engine discount package along with 3 months free updates of 350-401 exam questions. We have compiled CCNP Enterprise exam dumps question answers pdf file for you so that you can easily prepare for your exam. Our Cisco braindumps will help you in exam. Obtaining valuable professional Cisco CCNP Enterprise certifications with 350-401 exam questions answers will always be beneficial to IT professionals by enhancing their knowledge and boosting their career.
Yes, really its not as tougher as before. Websites like Realbraindumps.com are playing a significant role to make this possible in this competitive world to pass exams with help of CCNP Enterprise 350-401 dumps questions. We are here to encourage your ambition and helping you in all possible ways. Our excellent and incomparable Cisco Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam questions answers study material will help you to get through your certification 350-401 exam braindumps in the first attempt.
Pass Exam With Cisco CCNP Enterprise Dumps. We at Realbraindumps are committed to provide you Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) braindumps questions answers online. We recommend you to prepare from our study material and boost your knowledge. You can also get discount on our Cisco 350-401 dumps. Just talk with our support representatives and ask for special discount on CCNP Enterprise exam braindumps. We have latest 350-401 exam dumps having all Cisco Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) dumps questions written to the highest standards of technical accuracy and can be instantly downloaded and accessed by the candidates when once purchased. Practicing Online CCNP Enterprise 350-401 braindumps will help you to get wholly prepared and familiar with the real exam condition. Free CCNP Enterprise exam braindumps demos are available for your satisfaction before purchase order.
Send us mail if you want to check Cisco 350-401 Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) DEMO before your purchase and our support team will send you in email.
If you don't find your dumps here then you can request what you need and we shall provide it to you.
Bulk Packages
$60
- Get 3 Exams PDF
- Get $33 Discount
- Mention Exam Codes in Payment Description.
Buy 3 Exams PDF
$90
- Get 5 Exams PDF
- Get $65 Discount
- Mention Exam Codes in Payment Description.
Buy 5 Exams PDF
$110
- Get 5 Exams PDF + Test Engine
- Get $105 Discount
- Mention Exam Codes in Payment Description.
Buy 5 Exams PDF + Engine
 Jessica Doe
CCNP Enterprise
We are providing Cisco 350-401 Braindumps with practice exam question answers. These will help you to prepare your Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam. Buy CCNP Enterprise 350-401 dumps and boost your knowledge.
FAQs of 350-401 Exam
What is the Cisco 350-401 ENCOR Exam?
The Cisco 350-401 ENCOR (Implementing and Operating Cisco Enterprise Network Core Technologies) exam is a comprehensive test that covers core enterprise network technologies including networking, security, automation, and programmability.
How can Realbraindumps.com help me prepare for the Cisco 350-401 ENCOR Exam?
Realbraindumps.com offers extensive 350-401 ENCOR study materials, practice exams, and guides specifically designed for the Cisco 350-401 ENCOR exam to ensure thorough preparation.
What topics are covered in the Cisco 350-401 ENCOR Exam?
Key topics include network fundamentals, network assurance, security principles, automation, and programmability within Cisco networks.
What are the career benefits of passing the Cisco 350-401 ENCOR Exam?
Passing the exam can lead to qualifications like CCNP Enterprise, enhancing job opportunities in roles such as network engineer or systems administrator.
Does Realbraindumps.com provide up-to-date resources for the Cisco 350-401 ENCOR Exam?
Yes, Realbraindumps.com ensures all study materials for the Cisco 350-401 ENCOR Exam are current and reflect the latest exam syllabus and industry trends.
What is the average salary for a Cisco-certified professional?
Salaries vary based on role and location, but Cisco-certified professionals typically enjoy competitive compensation in the IT industry.
Are there any prerequisites for taking the Cisco 350-401 ENCOR Exam?
There are no formal prerequisites for the 350-401 ENCOR exam, but a good understanding of the exam topics and practical experience is highly recommended.
How does Realbraindumps.com ensure the quality of its Cisco exam preparation materials?
Realbraindumps.com uses expert-developed materials, regularly updated to reflect exam changes and feedback, ensuring high-quality and relevant content.
Can I get a refund from Realbraindumps.com if I'm not satisfied with the study materials?
Yes, Realbraindumps.com offers a refund policy for its materials. Please refer to the website for specific terms and conditions.
What is the importance of network automation in the Cisco 350-401 ENCOR Exam?
Network automation is a key topic in the exam, reflecting the industry’s shift towards more efficient, programmable network solutions.
How often should I update my Cisco certification after passing the 350-401 ENCOR Exam?
Cisco certifications typically require recertification every three years to ensure your skills remain up-to-date with current technologies.
|
